PFM Screen helps library in the field of metal mesh belt

+86-15369679157

[email protected]

Home

Help

Help

How to clean the chain

Do not directly immerse the mechanical chain in strong acid and strong alkaline cleaners such as diesel, gasoline, kerosene, WD-40, degreaser, because the inner ring bearing of the chain is filled with high-viscosity oil. After washing it off, it will make the inner ring dry, no matter how much low-viscosity chain oil is added afterwards, it will not help. Proposed cleaning method 1. Wash with hot soapy water and hand sanitizer. Take a harder brush and drench it with water directly. The cl

Analysis of the cause of slippage of stainless steel mesh belt

Analysis of the cause of slippage of stainless steel mesh belt: 1. The initial supporting force is very small. Insufficient support of the stainless steel mesh belt leaving the drum causes the stainless steel mesh belt to slip. This situation usually occurs at the moment the conveyor starts, and the way to deal with it is to adjust the tensioning equipment to increase the initial support force.Analysis of the cause of slippage of stainless steel mesh belt: 1. Too fast-starting rate

«
1
2
3
4
5
6
7
8
»

PFM SCREEN Belting

Products

Support

Contact Us

Add: No.1107, Floor 11, DazhongPlaza, Yinhe Road Guangyang District, Langfang, Hebei, China
Tel: +86-316-2188808
Mobile: +86-15369679157
Email: [email protected]

Follow Us

Copyright © 1987 - 2026 PFM SCREEN All Rights Reserved.